Available Languages
Tubing Products
Fabricated Products
Heat Exchangers
Other Products
Contact Information
International Customers: Dial US Country Code, followed by the phone or fax numbers listed below or e-mail specific product inquiries to Customer Support address. For general inquiries, please use the General Information e-mail address. We will respond promptly for standard product inquiries.
Telephone Toll Free
USA and Canada Only:
1-877-777-2629
Local Telephone
973-575-0760
973-276-1931
FAX
973-575-0431
Postal address
Fluorotherm Polymers Inc.
333 New Road
Parsippany, NJ 07054
Electronic mail:
sales@fluorotherm.com
Customer Support: sales@fluorotherm.com
Send mail to webmaster@fluorotherm.com with questions or comments about this web site.
Welcome:
Please enjoy Fluorotherm's website to view our PTFE, PVDF, PFA, FEP plastic tubing, and Teflon heat exchangers and coils
Fluorotherm manufactures the following Corrosion Resistant and Ultrapure PTFE, TFE, FEP, PFA, MFA products:
- Heat exchangers
- Immersion Heating/ Cooling Coils
- Extruded Tubing & Coils
- Custom Machined and Fabricated Fluoropolymer Products
Extruded fluoropolymer PTFE, PVDF, PFA, MFA, ETFE, and FEP Plastic Tubing
See our frequently updated FAQ section in the sidebar for answers to questions that you may have
This caption can be styled using CSS.
This caption can be styled using CSS.
click to enlarge
NEW PRODUCTS
Fluorotherm introduces corrosion resistant load bearing metal rods; with complete encapsulation in PTFE, FEP, PFA. These rods may be used to support work in a corrosive environment such as a plating or coating bath, as carrier to transport work in a chemically agressive environment and in numerous other uses. The rigidity of the metal core provides strength that cannot be matched by plastic rods. A PTFE or other adapter of appropriate configuration over the encapsulated rod can be used as points of support. This encapsulated construction provides the strength of metal and the chemical resistance of Teflon® type materials. Such construction can bear upto 700 lb loads in nitric, HF; hydrochloric and sulfuric acid baths and other hazardous atmospheres. The complete fluoropolymer encapsulation is distinctly superior to heat shrink tube covering where the wall thickness is too light to sustain reasonable loads or abrasive wear, without tearing or cracking. The high continuous use temperature of PTFE, FEP or PFA permits these materials to be used up to 400 deg F.
This caption can be styled using CSS.
This caption can be styled using CSS.
This caption can be styled using CSS.
click to enlarge
NEW! - at Fluorotherm
Click here to See Fluorotherm Heat Exchangers in Action.
Our brochures are now available and accessible through our Product Literature and Brochures page.
Fluorotherm announces the following new activities, developments or products that are of interest to you. Please see the links corresponding to each new item for details.
- APFO free plastic tubing - Fluorotherm now offers APFO free fluoropolymer PTFE, PFA, and FEP plastic tubing in the near future. You may be aware APFO has come under scrutiny recently; as a result some applications may have a specific need for this type of tubing. Click on Tubing Industrial Size Specifications for details
- Fluorotherm invests in new production facility to increase capacity and provide rapid turnaround from order to shipment. Click on link to NEWS page for more information.
- Faster lead times for fluoropolymer plastic tubing - PVDF, PTFE, PFA, ETFE, FEP plastic tubing stocking levels have increased in combination with production changes to meet customer demands for quicker than normal deliveries for both standard and custom sizes in any of these tubing materials. Click on Tubing Industrial Size Specifications
- New PVDF Immersion Coil Heat Exchanger - Fluorotherm introduces this new product to our family of Immersion Coil Heat Exchangers that have been in use worldwide since 1965 for the metal finishing, semiconductor, aerospace, plating, steel, galvanizing and other industries. Immersion heat exchangers are available in FEP tubing coils and PFA tube coils. Click on Immersion Heat Exchangers for details
- Wider range of custom designs are now available in Immersion Heat Exchanger Coils for a large variety of tanks with different geometries and internal space restrictions. Click on Immersion Heat Exchangers
- Higher surface area fluoropolymer Shell & Tube heat exchangers now available - for more information, click on Shell & Tube Heat Exchangers for details
- Technical questions and issues answered - see our updated FAQ page on the sidebar for answers to technical questions that you may have.
technical data
detailed properties
Sign up for our Newsletter
